General Features; Reproduction Ratio; Reproduction Ratio 2 / 2 - Ricoh Aficio 1232C Operating Instructions Manual

User Tools (Copier/Document Server Features)

General Features

❖ ❖ ❖ ❖ Clear Bypass Mode
Set this function to whether or not
the settings of the Bypass Tray are
cleared, when the machine is
turned on, reset, or modes are
cleared.
❖ ❖ ❖ ❖ Colour Mode Priority
You can select the priority of the
colour mode.
❖ ❖ ❖ ❖ Two-Colour Mode Priority
Set this function to whether or not
to prioritize "Red & Black" or
"Two-colour" when using the
5
"Two-colour" modes.
❖ ❖ ❖ ❖ Auto Image Density Priority
Set this function to whether or not
use Automatic Density, when the
machine is turned on, reset, or
modes are cleared.
Note
❒ When using the Auto Colour
Select function, the settings of
Full Colour/Two-colour will be
effective.

Reproduction Ratio

❖ ❖ ❖ ❖ Shortcut R/E
You can register up to three fre-
quently used Reduce/Enlarge ra-
t i o s o t h e r t h a n t h e f i x e d
Reduce/Enlarge ratio and have
them shown on the initial display.
You can also change the registered
Reduce/Enlarge ratios.
If no Reduce/Enlarge ratio has
been set when selecting [Shortcut
R/E 1], [Shortcut R/E 2], or [Shortcut
R/E 3] , en t er th e d esire d Re -
duce/Enlarge ratio using the
number keys.
100
5
/
5
1
/
2
❖ ❖ ❖ ❖ Enlarge 1-5
You can customize the enlarge-
ment ratios available when you
press [Reduce/Enlarge] followed by
[Enlarge].
Enlarge1 Enlarge2 Enlarge3 Enlarge4 Enlarge5
❖ ❖ ❖ ❖ Priority Setting: Enlarge
You can set the ratio with priority
when [Reduce/Enlarge] is pressed,
followed by [Enlarge].
Reproduction Ratio
❖ ❖ ❖ ❖ Reduce 1-6
You can customize the reduction
ratios available when you press
[Reduce/Enlarge] followed by [Re-
duce].
Reduce1 Reduce2 Reduce3 Reduce4 Reduce5 Reduce6
❖ ❖ ❖ ❖ Priority Setting: Reduce
You can set the ratio with priority
when [Reduce/Enlarge] is pressed,
followed by [Reduce].
❖ ❖ ❖ ❖ Ratio for Create Margin
You can set a Reduce/Enlarge ra-
tio when registering "Create Mar-
gin" in a Shortcut Key.
❖ ❖ ❖ ❖ R/E Priority
Specifies which tab is given priori-
ty on the display panel when [Re-
duce/Enlarge] is pressed.
2
/
2