Ricoh Aficio 1232C Operating Instructions Manual page 51

C C C C
Place your originals.
Note
❒ When placing an original on the
exposure glass, start with the
first page to be copied. When
placing an original in the docu-
ment feeder (ADF), set so that
the first page is on the top.
❒ After scanning the entire original
from the exposure glass or through
the document feeder, press [#].
D D D D
Press the { { { { Start} } } } key.
Sample Copy
Use this function to check the copy
settings before making a long copy
run.
Note
❒ This function can be used only
when the Sort function has been
turned on.
A A A A
Select Sort and any other func-
tions, and then place the origi-
nals.
B B B B
Press the { { { { Sample Copy} } } } key.
ABC ABC DEF DEF
GHI GHI JKL JKL MNO MNO
PQRS PQRS TUV TUV WXYZ WXYZ
One copy set is delivered as a sample.
C C C C
If the sample is acceptable, press
[Print].
The number of copies made is the
number you specified, minus one
for the proof copy.
Note
❒ If you press [Suspend] after
checking the results, return to
step A to adjust the copy set-
tings as necessary. You can
change the settings for Staple,
Duplex, Copy Orientation,
Stamp, Margin Adjust., and
Cover/Slip Sheet. However, de-
pending on the combination of
functions, you may not be able
to change some settings.
Changing the Number of Sets
You can change the number of copy
sets during copying.
Note
❒ This function can only be used
when the Sort function has been
turned on.
A A A A
While "Copying" is displayed,
press the { { { { Clear/Stop} } } } key.
B B B B
Press [Change Quantity].
C C C C
Enter the number of copy sets
with the number keys, and then
press the { { { { #} } } } key.
Note
❒ The number of sets you can en-
ter differs depending on when
the { { { { Clear/Stop} } } } key is pressed.
D D D D
Press [Continue].
Copying starts again.
Copy Functions
2
41