Table of Contents
Advertisement
3. To reassemble the door, put the hinges in
the relevant slots in the oven, making sure
that grooved sections A are resting
completely in the slots. Lower the door
and once it is in place remove the pins
from the holes in the hinges.
4.4 Cleaning the door glazing
The glass in the door should always be kept
thoroughly clean. Use absorbent kitchen
roll. In case of stubborn dirt, wash with a
damp sponge and an ordinary detergent.
We recommend the use of
cleaning products distributed by
the manufacturer.
4.5 Removing the internal glass
panes
For easier cleaning the door internal glass
panes can be disassembled.
Multifunction oven doors
1. Remove the internal glass pane by
pulling the top part gently, following the
movement indicated by the arrows (1).
68
Cleaning and maintenance
2. Then, pull the bottom part upwards (2). In
this way, the 4 pins attached to the glass
detach from their housings in the oven
door.
3. Hold the intermediate glass pane and
unscrew the screw to remove the lower
plate holding it in place.
Improper use
Danger of cuts and glass crack
• Pay attention to the intermediate glass
pane that could accidentally come out
of its seat during this phase.
Advertisement
Table of Contents
