Advertisement
How to Install the Hob
Overall dimensions of the hob:
Width: 576 mm Depth: 518 mm
Worktop cut-out dimensions:
Width: 560 mm Depth: 490 mm
1. Make the required hole in the worktop.
Before doing this, you must check the
instructions supplied with any cooker hood to ensure that you will
have the required clearance. The cut-out (Fig.7) shows a 60mm gap
from the worktop edge to the cut-out edge. The distance from the
hob, when fitted, to the back wall is to be 50mm.
If a splashback/worktop upstand is to be fitted, take this into
account when cutting the hole. The minimum distance that the hob
should be positioned away from the rear wall or splashback is 50mm.
2. Make sure that
the worktop is
clean and dust
free and insert
the hob into the
cut-out opening.
Press the hob
firmly into place
so that the seal
connects with the
worktop (Fig. 6).
Front edge of worktop
Fig.7
1
1 - Worktop
2 - Hob seal
3 - Ceramic hob
Fig.6
560
Rear Wall
Cut-out
Min.
2
3
Adjacent vertical surface
(cupboard etc. -
Measurement applicable
to both sides.)
55
15
Advertisement
