Advertisement
Type of residue
Light
Accumulated
baked-on stains/
dirt, sugar spills or
melted plastics
Rings and hard
water residues
Shiny metallic
streaks
9
If your hob is not working:
1. Check that the zone is switched on.
2. Check that the mains supply has not been switched off.
3. Check that the fuse in the spur has not blown.
In the event of a fault with the hob please advise CDA Customer
Care.
Contact CDA Customer Care
A: Customer Care Department, The CDA Group Ltd, Harby Road,
Langar, Nottinghamshire, NG13 9HY
T: 01949 862 012
E: customer.care@cda.eu
Clean with
Cleaning sponge
and soft cloth
Cleaning sponge
or glass scraper
and soft cloth
White vinegar and
soft cloth
Cleaning agent for
vitroceramic glass
fast frying steaks
F: 01949 862 003
W: www.cda.eu
Cleaning advice
Wipe over the zone to be cleaned
with a sponge and hot water, and
then wipe off with a soft dry cloth.
Wipe over the zone to be cleaned
with a sponge and hot water, using a
ceramic scraper to remove any large
marks or stains and then wipe off
with a soft dry cloth.
Pour a small amount of warm white
vinegar onto the stain, leave it to
stand, and then wipe off with a soft
dry cloth.
Use specialist vitroceramic glass
cleaner (preferably one with silicone
for its protective properties)
11
Advertisement
