Download Print this page

CDA MATRIX MHC101FR Manual For Installation, Use And Maintenance page 8

Ceramic hob

Advertisement

Residual Heat Indicators
The hob is equipped with residual heat indicators to warn when
any of the zones are still hot to the touch after use. A residual
heat indicator
will illuminate to show if the relevant zone is
approximately 50°c or above. You should avoid touching any zone
whilst the hob is in use or whilst either residual heat indicator is
displayed.
Please note: In the event of a power cut or failure, the residual heat
indicators will illuminate after the power supply is restored. When
there is no power supply to the hob however the residual heat
indicators will not work, yet the hob zone(s) may still be hot, so extra
care must be taken.
The residual heat indicators' layout matches that of the hob zones, as
below:
Rear right
Rear left
Front left
Front right
8

Advertisement

loading