Basic Functions
Volume control
Press VOLUME -/+ (VOL +/- on the remote)
to increase or decrease the volume level.
➜
"VOL XX" is displayed on the display panel.
"XX" denotes the volume level.
To switch off the volume temporarily
●
Press MUTE on the remote.
➜
Playback will continue without sound and
"MUTING" flashes.
●
To activate sound reproduction, you can:
– press MUTE again;
– adjust the volume controls;
– change source.
Dimming the display screen
●
Press DIM repeatedly to select different levels of
brightness for the display screen.
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the system.
To activate the demonstration
●
In standby mode, press 9 on the system to
activate the demo mode.
➜
Demonstration will begin.
To deactivate the demonstration
●
Press 9 on the system again.
➜
"DEMO OFF" is displayed.
Note:
– Even if you remove the AC power cord and
reconnect it to the wall socket, the demonstration
will remain off until you activate it again.
22
pg021-pg044_MCD299-98-Eng-B
22
2007.9.27, 13:04