Setting Up Progressive Scan Feature; Progressive Scan Tv Only); Step 4: Setting Language Preference - Philips MCD299/98 User Manual

Note:
The format you select must be available on the
disc. If it is not, the setting for TV Display will not
affect the picture during playback.
To exit the menu
Press SYSTEM MENU again.
Setting up Progressive Scan feature (for

Progressive Scan TV only)

The progressive scan display twice the number
of frames per seconds than interlaced scanning
(ordinary normal TV system). With nearly double
the number of lines, progressive scan offers
higher picture resolution and quality.
IMPORTANT!
Before enabling the progressive scan
feature, you must ensure:
1) Your TV can accept progressive signals, a
progressive scan TV is required.
2) You have connected the DVD player to your
TV using Y Pb Pr (see "Installation-Step 3:
Connecting TV - Using Y Pb Pr OUT jack ".)
1
Turn on your TV.
2
Turn off your TV progressive scan mode or turn
on interlaced mode (refer to your TV user
manual).
3
Press STANDBY -ON B to turn on the DVD
player.
4
Select the correct Video Input channel.
➜
The DVD background screen appears on the
TV.
5
Press SYSTEM MENU.
6
Press à/á repeatedly to select "Video
Setup page".
7
Move to "Progress" and press á.
8
Move to "On" and press OK to confirm.
➜
The setup is complete now and you can star t
to enjoy the high quality picture.
pg001-pg020_MCD299-98-Eng-A
Step 4: Setting language
You can select your preferred language settings
so that this DVD Micro System will automatically
switch to the language for you whenever you
load a disc. If the language selected is not
available on the disc, the language set by default
will be used instead. But the menu language of
the DVD Micro System cannot be changed once
selected.
1
In stop mode or during playback, press
SYSTEM MENU.
2
Press à/á/5/4 on the remote control to
select your preferred option.
➜
Move to General Setup Page and
Preference Page respectively and press 4.
➜
Move to one of the following and press á.
– – General Setup Page – –
OSD Lang
Screen Saver
OSD Lang (On-Screen Display)
Switches the display language on the TV screen.
Select the language from the displayed list.
19
Preparations
preference
English
Spanish
Portuguese
Thai
Chinese
Others
2007.9.27, 13:04
19