Switching The System On; Switching The System To Standby Mode; Switching The System To Eco Power Standby Mode; Power Saving Automatic Standby - Philips Streamium MC-i200 Getting Started

Basic Functions

Switching the system on

In standby mode
Press STANDBY ON to switch on the last
selected source.
Press PC-LINK, CONNECT, CD, TUNER,
or AUX to select the desired source.
In Eco Power Standby mode
Press STANDBY ON on the system.
Press PC-LINK, CD, TUNER, CONNECT
or AUX on the remote control.
Switching the system to standby
mode
Press STANDBY ON (or B on the remote
control).
The clock will appear on the display when the
system is in standby mode.
Switching the system to Eco
Power standby mode (<0.5W)
Press and hold STANDBY ON (or B on the
remote control) for more than three seconds.
"ECO POWER MODE ECO POWER MODE ECO POWER MODE" is displayed, then the ECO POWER MODE
ECO POWER MODE
display screen will go blank.
The low power LED will be lighted.

Power saving automatic standby

As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 30 minutes after a
disc has stopped playing.
16

Dim mode

You can select the desired brightness for the
display.
Press DIM on the remote control repeatedly to
select DIM 1, DIM 2, DIM 3 or DIM OFF display
mode.
and the corresponding dim level will
DIM
appear on the display, except for DIM OFF mode.
DIM LEDs
mode
1
off
2
on
3
off
OFF
on

Volume control

Adjust SOUND JOG (or press VOLUME
+/- on the remote control) to increase or
decrease the volume level.
"-XX dB -XX dB -XX dB" is displayed. "XX -XX dB XX XX XX" denotes the
-XX dB XX
volume level.
To listen through the headphones
Connect the headphones plug to the n socket
at the front of the system.
The speakers will be muted.
To switch off the volume temporarily
Press MUTE on the remote control.
Playback will continue without sound and
"MUTE ON MUTE ON" is displayed.
MUTE ON MUTE ON MUTE ON
To restore the volume, press MUTE again or
increase the volume level.
3139 115 21472