Appendix; How To Mount Your System Onto Wall - Philips MCD299/98 User Manual

How to mount your system onto
wall
IMPORTANT!
– The wall mounting instructions are
for use by the qualified wall mounting
person only!
– Ask a qualified person to help you
with the wall mounting, which includes
drilling holes on the wall and
mounting the set onto wall.
What's in the supplied mounting kit
164 mm
What else you'll need
– Drilling tools (e.g. an electric drill)
Preparation
1
Find a suitable location for mounting and
complete necessary rear connections (see
Preparations).
2
Ask a qualified person to help you with the wall
mounting, who should:
– to avoid unexpected damage, learn about the
piping, wiring and other relevant information
inside your wall;
– according to the drilling requirements,
choose suitable drilling tools;
– take other precautions necessary for the wall
mounting work.
pg021-pg044_MCD299-98-Eng-B
1
2
3
1 x template
6 x screws and dowels
4
2 x speaker brackets
5
43

Appendix

Mounting your main unit onto wall
Align the template in the chosen location on a
wall. Use a pencil to mark the drilling positions
(as shown).
164 mm
Drill two 6mm diameter holes as marked.
Secure the dowels and screws in the holes
respectively, leaving the screws 5mm proud of
the wall.
To detach the stand from the main unit,
a. As shown, hold down PRESS4.
b. Move out the stand to detach.
1
Hang the main unit on the fastening screws.
2007.9.27, 13:05
43