Reset Roip To Factory Default - Pulse ROIP-400 Operation Manual

Health Retry: No of Times Health Request will be sent, non response

of which will lead to Connection Expired.
Connection Timer: Time Interval, in seconds, after which a connection

request will be sent.
Connection Retry Count: No of Times Connection Request will be sent,

non response of which will lead to Init Mode.
Connection Wait Timer: Time Interval, in seconds, for which System

will wait after power on for Initialization of Network.
System Reboot
 To Reboot or Restart System, click on System Reboot Link.
Reset ROIP to Factory Default Settings
Power On the ROIP.

Locate a press button at the bottom end of ROIP.

Press the button for 5-6 seconds while the ROIP is powered on, till

all led at the front panel blinks twice.
Reset Power of ROIP for changes to take effect.

15
Copyright 2017 @ Pulse Communication Systems Pvt. Ltd.
ROIP-400 Operation Manual