Radio Group Configuration - Pulse ROIP-400 Operation Manual

PTT Delay Timer: Audio Delay Value in millisecond.

PTT Time Out Timer: Time ,in millisecond, for which if PTT is

PTT Release Timer: Time, in millisecond, after PTT off, for which


Radio group Configuration

 Select "Radio group Config " on the Home Page.
 A Radio group configuration Settings Page will open as shown below.
 Create Group as per your requirement.
 Click on Save to confirm the changes.
 Reset Power of ROIP for changes to take effect .

Radio Group: Select group, which you want to modify

Radio Port 1, 2, 3 & 4: Tick that Checkbox which you want to add in the
group.

Group Audio Shared Type:
None : No audio shared in group
Permanent Shared : Audio permanent shared to every member of
group.
On DTMF Command only: Audio is shared in group only when you
provide the command.
13
enabled, it would be automatically disabled.
(Value: 0, feature disabled)
receive signal will be disabled.
Copyright 2017 @ Pulse Communication Systems Pvt. Ltd.
ROIP-400 Operation Manual