Local Ip Settings Configuration - Pulse ROIP-400 Operation Manual

Radio Over IP Gateway Settings Home Page will appear as below.

IP Settings Configuration
Select "Local Ip Config Settings" on the Home Page.

A Local IP Configuration Settings Page will open as shown below.

Modify values as mentioned in "System Configuration"

Click on Save to confirm the changes.

Reset Power of ROIP for changes to take effect.

Local IP: Ip Address of the ROIP in the local area network

Subnet Mask: Subnet Mask of the local area network

Gateway: Ip Address of the gateway of local area network

10
Copyright 2017 @ Pulse Communication Systems Pvt. Ltd.
ROIP-400 Operation Manual