142 | Drystar 5301, Drystar 5302 | Plug & Play Installation Manual
Connect the cables
10
1
1. Select power cable (country specific, order separately).
2. Connect the power cable.
3
3. Connect network cable.
5
2831F EN 20210601 1655
WARNING:
To avoid risk of electric shock, this equipment must only be
connected to a supply mains with protective earth.
WARNING:
When installing the printer, care must be taken to ensure that
Connect the cables (1 of 2)
there is either a mains plug or an all-cable disconnecting device
in the internal installation fitted near the printer and that it is
easily accessible.
Select power cable
(country specific, order separately).
Connect the power cable.
Locate the network connector and
connect the network cable.
2
Locate the mains connector.
4
Mount the strain relief.
6
Move the printer to its final destination
and lock the wheel.