Film types
Film type
Original Agfa
branded Dry-
star film
The printer has 2 input trays. Both trays can handle all listed film types and
formats.
When a new film pack is loaded, the Film Identification tag is read and the
printer settings are automatically adjusted.
The Key-operator can overrule the film settings for the input tray.
Labeling the input trays
Appropriate labels have been applied on the input tray(s) by the service
personnel at installation of the printer, indicating the type of new film to be
loaded when the tray is empty.
Drystar 5301, Drystar 5302 | Drystar 5301, Drystar 5302 | 11
Film base
Application
blue-trans-
General Ra-
parent
diography
clear-
transpar-
ent
Note: If you want to change the film format, the tray
configuration must be modified.
Film sizes
Average opti-
cal density
(X-Rite 310
densitometer)
8x10", 10x12",
3.2
11x14",
14x14", and
3.0
14x17"
2831F EN 20210601 1655