Table of Contents
Advertisement
Connect the cables
10
1
Select power cable
(country specific, order separately).
1. Select power cable (country specific, order separately).
2. Connect the power cable.
3
Connect the power cable.
3. Connect network cable.
5
Locate the network connector and
connect the network cable.
Drystar 5301, Drystar 5302 | Plug & Play Installation Manual | 129
WARNING:
To avoid risk of electric shock, this equipment must only be
connected to a supply mains with protective earth.
WARNING:
When installing the printer, care must be taken to ensure that
Connect the cables (1 of 2)
there is either a mains plug or an all-cable disconnecting device
in the internal installation fitted near the printer and that it is
easily accessible.
2
Locate the mains connector.
4
Mount the strain relief.
6
Move the printer to its final destination
and lock the wheel.
2831E EN 20161128 1410
Advertisement
Table of Contents
