Table of Contents
Advertisement
TROUBLESHOOTING
Condition/Problem
No display/partial display/
unit will not turn on
Console display shows "0
error code
Console display shows "3
code
Console display shows "5
Unit operates but
Bluetooth
HR not
®
displayed
No speed/RPM reading,
Console displays "Please
Pedal" error code
32
Things to Check
Check electrical (wall)
outlet
Check connection at front
of unit
Check data cable integrity
Check data cable
connections/orientation
Check console display for
damage
Console Display
Check data cable integrity
Check data cable
connections/orientation
Check console display for
damage
Check console keypad
Console
HR monitor (not provided)
HR monitor batteries
Interference
Replace HR monitor
Replace Console
Check data cable integrity
Check data cable
connections/orientation
Make sure unit is plugged into a functioning wall outlet.
Connection should be secure and undamaged. Replace
adapter or connection at unit if either are damaged.
All wires in cable should be intact. If any are visibly pinched or
cut, replace cable.
Be sure cables at base of mast and at back of console are con-
nected securely and oriented properly. Small latch on connec-
tor should line up and snap into place.
Check for visual sign that console display is cracked or other-
wise damaged. Replace Console if damaged.
replace the Console.
If the above steps do not resolve the problem, contact Cus-
tomer Service (if inside US/Canada) or your local distributor (if
outside US/Canada).
All wires in cable should be intact. If any are visibly pinched or
cut, replace cable.
Be sure cables at base of mast and at back of console are con-
nected securely and oriented properly. Small latch on connec-
tor should line up and snap into place.
Check for visual sign that console display is cracked or other-
wise damaged. Replace Console if damaged.
If the above steps do not resolve the problem, contact Cus-
tomer Service (if inside US/Canada) or your local distributor (if
outside US/Canada).
Check for stuck buttons on the Console keypad. Replace Con-
sole if damaged.
If the above steps do not resolve the problem, contact Cus-
tomer Service (if inside US/Canada) or your local distributor (if
outside US/Canada).
tomer Service (if inside US/Canada) or your local distributor (if
outside US/Canada).
Follow the troubleshooting instructions provided with the
device.
If monitor has replaceable batteries, install new batteries.
Try moving unit away from sources of interference (TV, Micro-
wave, etc).
If interference is eliminated and HR does not function, replace
HR monitor.
If HR still does not function, replace Console.
All wires in cable should be intact. If any are cut or pinched,
replace cable.
Be sure each cable is connected securely and oriented proper-
ly. Small latch on connector should line up and snap into place.
Solution
ontact Cus-
Advertisement
Table of Contents
