Table of Contents
Advertisement
* Install the product according to the following: (Confirm separately for optional items or special
specifications)
Model
Serial number
Item
№
Specifications
1
Accessories
2
Installation
Operation-related matters
1
Source voltage
Operation start
2
(Fixed
Temp
operation)
Operation start
3
(Auto stop)
Operation start
4
（Auto start）
5
Program operation
Description
Operational
1
descriptions
2
Error codes
Maintenance
and
3
inspection
Completion
of
4
installation
Entries
14. Standard installation manual
Date
Implementation method
Check for number of accessories on the basis of the
column for accessories.
・Visual check of environmental conditions
Caution:
Take care for environment
・Securing a space
・Measure the user side voltage (outlet, distribution board,
etc.) with a tester
・Measure voltage during operation
(shall meet the specifications)
Caution: Always use a plug that meets the specification
for attaching to the ELB.
・Perform Fixed Temp operation.
Set to 100℃ and check the stable status.
Note：Check that the calibration offset is set at "0".
・Perform Auto Stop operation.
Input 2 minutes to the auto stop mechanism and check
for the proper operation.
・Perform Auto Start operation.
Input 2 minutes to the auto start mechanism and check
for the proper operation.
・Perform as necessary.
・Explain the customer about each assembly as per the
operation manual.
Note：Be sure to explain the Calibration Offset function
(to prevent erroneous operation).
Explain the customer about error codes and procedures for
release according to the operational instructions
Explain operations of each component according to the
operational instructions
・Fill in the installation date and the installation mgr. on the
nameplate of the main unit
・Fill in necessary information to the warranty card and
hand it over to the customer
・Explanation of the route for after-sales service
Installation
mgr.(company name)
TOC No. Reference page of the operating
instruction manual
10. Specifications field
2. Before operating the unit
・On the installation site
2. Before operating the
unit
・Be sure to connect the
ground wire.
・Power supply is ....
10.Specifications
・Specification - power
supply
4. Operating Procedures
・Fixed Temp operation
4. Operating Procedures
・Auto Stop operation
4. Operating Procedures
・Auto Start operation
4. Operating Procedures
・Program operation
4. Operating procedures
・Operating procedures
1. Safety precautions
～ 13.
dangerous materials
8. Troubleshooting
～9. After sales service
and warranty
6. Maintenance
procedures
・Daily inspection/
maintenance
9. After sales service and
warranty
66
Judg
Installation mgr.
ment
Judgme
nt
P.59
～P.60
P.4
P.6
P.6
P.60～
P. 16～
P.16～
P.16～
P.16～
P.16～
P.1～
List
of
P.65
P.56～
58
P.54
P.58
Advertisement
Table of Contents
