Operation Steps（Auto Stop Operation - Yamato DKG610 Instruction Manual

How to start Auto Stop
operation
MEASURED TEMP.
HEATER
ALARM ℃
AUTO STOP
AUTO START SET
TEMP.
FIXED TEMP.
PROGRAM
OVER TEMP .
PROTECTOR
RUN
ENTER
STOP
FIXED SUB
TIMER PROGRAM
MENU
TEMP.
MEASURED TEMP.
HEATER
ALARM ℃
AUTO STOP
AUTO START
SET
TEMP.
FIXED TEMP.
PROGRAM
OVER TEMP .
PROTECTOR
RUN
ENTER
STOP
FIXED SUB
TIMER PROGRAM
MENU
TEMP.
About the timer function Maximum settable time for the timer is 999 hours 50 minutes.
MEASURED TEMP.
HEATER
ALARM ℃
AUTO STOP
AUTO START
SET
TEMP.
FIXED TEMP.
PROGRAM OVER TEMP .
PROTECTOR
RUN
ENTER
STOP
FIXED SUB
TIMER PROGRAM
TEMP. MENU
4. Operating Procedures
Operation steps（Auto Stop operation）
This is used when you "want to stop Fixed Temp operation automatically
after set time from the beginning of that operation".
1. Setting a stop time
① In the initial screen, press
② The set temperature indicator will show the timer mode that you
used in the last session.
Pressing TIMER
Pressing
TIMER
Select the character AStP
operation and press
The character Sv
displayed on the measured temperature indicator while the
current set temperature and the Auto Stop lamp will flash on the
set temperature indicator.
③ Press ▽ and △
④ Press
key. The character tim
ENTER
timer is displayed on the measured temperature indicator and the
current set time will flash on the set temperature indicator.
⑤ Use
▽ and △
Time can be set in the unit of minutes up to 99 hours 59 minutes.
Time period 100 hours and longer shall be set in the unit of 10 minutes.
You can continuously change set time and change to the setting you
want quickly by keeping
keys once at a time to fine adjust a time.
2.Starting the Timer operation
When you have set a time you want, keep
about one second.
Timer operation starts with the Auto Stop lamp is lit.
The timer will start when the in-bath temperature (measured
temperature) reaches the set temperature.
22
TIMER key.
key again will make the timer mode flash.
key again will make the next timer mode flash.
that means the Auto Stop
ENTER key.
that means the temperature setting is
keys to set a temperature you want.
keys to set a time you want.
▽ and △
keys pressed. Press
that means the
▽ and △
RUN/STOP key pressed for