Table of Contents
Advertisement
(1)
Release the stopper lock of the caster wheels.
Set the stoppers of the caster wheels to the
high position as shown in the drawing in the
right.
Now the lock is released.
（Only two caster wheels at the front of the
unit have stoppers.）
(2)
Transport the unit to the installation site.
* Transporting the unit over a gap may give an excessive shock to the caster wheels and
may damage them.
If such trouble is expected, lift the unit and transport it over the gap.
(3)
Lock the caster stoppers when the unit has been transported to the installation site.
They are locked.
(4)
Connection of the power supply.
Make sure that the ELB is "OFF(○)" before connecting the power supply to the power
distribution board and the outlet.
※(1),(2),and (3) are for DKG810(V)/DKG850(V) only.
Precautions when Installing the Unit
Installation procedures/precautions
Lock release
ロック解除
ロック
Lock
9
ストッパー
Stopper
キャスター
Caster
Advertisement
Table of Contents
