Operation Steps（Quick Auto Stop Operation - Yamato DKG610 Instruction Manual

How to start quick
auto stop operation
MEASURED TEMP.
HEATER
ALARM ℃
AUTO STOP
AUTO START SET
TEMP.
FIXED TEMP.
PROGRAM
OVER TEMP .
PROTECTOR
RUN
ENTER
STOP
FIXED SUB
TIMER PROGRAM
MENU
TEMP.
About the timer function Maximum settable time for the timer is 999 hours 50 minutes.
MEASURED TEMP.
HEATER
ALARM ℃
AUTO STOP
AUTO START
SET
TEMP.
FIXED TEMP.
PROGRAM
OVER TEMP .
PROTECTOR
RUN
ENTER
STOP
FIXED SUB
TIMER PROGRAM
MENU
TEMP.
When you want to
correct a
temperature or a set
time or check settings
Operation steps（Quick Auto Stop operation）
This operation mode is used to when you "want to stop Fixed Temp
operation after several hours automatically in the middle of it". Quick
Auto Stop operation is a function to allow auto stop timer setting
during operation.
1.Set time period before stop during Fixed Temp operation
Make sure that the Fixed Temp operation lamp is on indicating the
unit is in the fixed temp operation mode.
Press
TIMER
The characters tim
measured temperature indicator and the current set period of time
flashes on the set temperature indicator.
▽ and △
Use
Time can be set in the unit of minutes up to 99 hours 59 minutes.
Time period 100 hours and longer shall be set in the unit of 10
minutes.
You can continuously change set time and change to the setting you
want quickly by keeping
keys once at a time to fine adjust a time.
2. Start timer operation
When you have set a time you want, press
about one second. Timer operation will start when the Fixed Temp
operation lamp and the Auto Stop lamp are lit. Timer starts when
key is pressed.
RUN/STOP
3. Stopping and ending Timer operation
Operation will stop automatically when the set time comes.
The buzzer sounds for about five seconds to tell you that operation
has stopped. At this time, the set temperature indicator display the
character End
Fixed Temp operation and the Auto Stop lamp are lit.
Press
RUN/STOP
operation mode. The screen will switch to the initial setting screen.
When you want to change a set temperature during operation, keep
key pressed to enter the setting mode and change the
FIXED TEMP.
set
temperature. After changing the temperature, press
complete. When want to change a set temperature during operation,
keep TIMER key to enter the setting mode and change the time. At
this time, you need to set a time calculated by adding time period to
add to the time already passed. After changing the setting, press
key to complete.
RUN/STOP
▽
Press key to display the set temperature, the operation mode, and
the remaining time on the set temperature indicator.
4. Operating Procedures
key.
that means a timer is displayed on the
keys to set a period you want.
▽ and △
keys pressed. Press
that means completion of operation with the
key for about one second to end the Timer
21
▽ and △
key for
RUN/STOP
key to
ENTER