Table of Contents
Advertisement
Characters used on the controller of this unit are described here.
Characters
3. Names and Functions of Parts
Identifier
Name
Fixed Temp operation
Fix
setting
Sv
Temperature setting
AStP
Auto Stop setting
AStr
Auto Start setting
tim
Time setting
PrG3
Program type selection
Program
PAt
selection
End
Time up
Program
Sv-1
setting
t-1
Program time setting
Selection
PS-3
destination of program
repeat
Setting
Pc-2
repeat
This means Fixed Temp operation
settings.
This is used to set a temperature.
This is used to set Auto Stop
operation.
This is used to set Auto Start
operation.
Used for setting a time.
This is used to select a program type
to use from 1 to 3.
See "Creating a program" on P.26.
This is used to select a program
pattern
pattern to use.
See "Creating a program" on P.26.
This
operation is finished.
See P.21 and 23.
This is used to set a temperature for
temperature
each step of a program.
（Displayed range is Sv-1～Sv-30）
This is used to set a time for each
step of a program.
（Displayed range is t-1～t-30）
This is used to select a return
of
return
destination step for program repeat
operation.
See "Program Repeat operation" on
P.31.
This is used to set a number of
of
program
Program Repeat operation.
See "Program Repeat operation" on
P.31.
14
Description of characters
Application
is
displayed
when
Timer
Advertisement
Table of Contents
