Operation Panel - Yamato DKG610 Instruction Manual

⑧
⑨
⑩
⑪
⑫
⑬
③
②
④
⑤
No Name
①
RUN/STOP Key
② ▽，△ Key
③
ENTER Key
④
FIXED TEMP. Key
⑤
TIMER Key
⑥
PROGRAM Key
⑦
SUB MENU Key
⑧
HEATER Lamp
⑨
ALARM Lamp
⑩
AUTO STOP Lamp
⑪
AUTO START Lamp
⑫
FIXED TEMP. Lamp
⑬
PROGRAM Lamp
⑭
MEASURED TEMP.
Display
⑮
SET TEMP. Display
⑯
OVER TEMP.
PROTECTOR
Display
3. Names and Functions of Parts
MEASURED TEMP.
HEATER
ALARM
AUTO STOP
AUTO START
SET
TEMP.
FIXED TEMP.
PROGRAM
OVER TEMP .
PROTECTOR
ENTER
FIXED
TIMER
TEMP.
This key is used to start/stop operation.
These keys are used to select a setting.
This key is used to determine a setting you selected.
This key is used to select the fixed temperature operation.
This key is used to select the timer operation.
You can select from quick auto stop operation, auto stop operation, and
auto start operation.
This key is used to make a program and to select program operation.
You can set a program fro m 3 types, 6 patterns.
This key is used to set overheat preventive device temperature, a
temperature for calibration offset, key lock, and the program repeat
function.
This lamp comes on while power is supplied to the heater.
Buzzer sounds and this lamp come on when an error occurs.
This lamp flashes during quick auto stop timer setting and stays on
during operation.
This lamp flashes during auto stop timer setting and stays on during
operation.
This lamp flashes during auto start time setting and stays on during
operation.
This lamp flashes during fixed temp operation setting and stays on during
operation.
This lamp flashes during program operation setting and stays on during
operation.
The display indicates measured in-bath temperature, setting characters,
and alarm information.
The display indicates a set temperature, timer setting, and timer
remaining time.
The display indicates a set temperature of the overheat preventive
device.
℃
RUN
STOP
SUB
PROGRAM
MENU
Operation／action
13

Operation panel

⑭
⑮
⑯
①
⑦
⑥