Table of Contents
Advertisement
Operation modes of this unit are as follows.
№
Name
Fixed Temp
1
operation
Quick Auto Stop
2
operation
3
Auto Stop operation
4
Auto Start operation
5
Program operation
※You cannot change the operation mode while the unit is in operation. Be sure to first stop
operation before trying to change the mode.
4. Operating Procedures
List of operation modes and functional menus
Pressing
FIXED TEMP.
setting mode.
Pressing
FIXED TEMP.
Setting mode.
▽ and △
Use
keys to set a temperature.
Press
RUN/STOP
key to start operation and press
key to stop operation.
This function is used when, for example, "to stop operation in
the middle of it after several hours".
You can press
TIMER
during the Fixed Temp operation.
▽ and △
Use
keys to set a time.
Pressing
key starts Quick Auto Stop operation and
RUN/STOP
the timer starts in the middle of it and automatically stops
operation when after set time elapsed.
This is used to set "operation to automatically stop when
setting Fixed Temp operation."
key to display "AStP".
Press
TIMER
You can press
ENTER
You can set an operation time "tim" by pressing
again.
Pressing
key starts Auto Stop operation.
RUN/STOP
This is used to "automatically start several hours" after turning
power on.
key to display "AStr".
Press
TIMER
You can press
ENTER
You can set an operation time "tim" by pressing
again.
Pressing
key starts Auto Start operation.
RUN/STOP
This is used to increase or decrease temperature above or
below set temperature and depending on specific time
periods.
key to display "PrGn".（n:1,2,3）
Press
PROGRAM
Press
key again to select a program mode you
PROGRAM
want.
For "PrG2" and "PrG3", press
pattern "Pat" you want.
Press
RUN/STOP
key to start program operation.
16
Description
key enters the Fixed Temp operation
key again enters the Temperature
key to set a time to stop operation
key to set a set temperature "Sv".
key to set a set temperature "Sv".
key to select a
ENTER
Page
P.20
RUN/STOP
P.21
P.22
key
ENTER
P.24
key
ENTER
P.26
Advertisement
Table of Contents
