Measure Edit - Technics sx-PR604/M Operating Instructions Manual

Part V

Measure Edit

You can edit the recorded data one measure at a time.
Select the function you wish to edit.
1.
During recording, press the MEASURE EDIT
button.
• The display looks similar to the following.
2.
Select the function.
MEASURE COPY
Copy recorded data of specified measures to a specified
point.
• On the destination track, the new data replaces the current
measure contents.
1.
Specify the measures you wish to copy from
the source track (FROM).
• On the FROM side, specify the settings with the corre-
sponding buttons.
PART:
Select the part to copy from. (If ALL is selected, all
parts are copied.)
FIRST MEASURE:
Specify the first measure to copy.
LAST MEASURE:
Specify the last measure to copy.
2.
Specify where you wish to copy the selected
measures to.
• On the TO side, specify the settings with the correspond-
ing buttons.
PART:
Select the part to copy to.
START MEASURE:
Specify the start point to copy the selected measures
to.
3.
Press the OK button.
• The confirmation display appears. Press the YES button
to execute the function, or press the NO button to cancel
the function.
• If the FROM and TO parts are the same and the FROM
and TO measures overlap, copy is not possible.
3.
Follow the procedure to edit the function (see
below).
• Only the contents of the same pattern can be edited.
MEASURE ERASE
Erase the recorded contents of specific measures.
• Note that only the contents of the measures are erased,
not the measures themselves; the length of the perform-
ance remains the same.
∧
1.
Use the PART and
part.
• If ALL is selected, data is erased from the specified
measures of all the parts at one time.
2.
Use the FIRST MEASURE
to specify the start point (measure number).
3.
Use the LAST MEASURE
specify the end point (measure number).
4.
Press the OK button.
• The confirmation display appears. Press the YES button
to execute the function, or press the NO button to cancel
the function.
Composer
∨
buttons to specify the
∧ ∨
and buttons
∧ ∨
and buttons to
91
QQTG0665