Effect Edit; Controller Edit - Technics sx-PR604/M Operating Instructions Manual

Part IX

Effect Edit

These are settings related to the various effects applied to your edited sound.
EFFECT
1.
On the SOUND EDIT menu display, select
EFFECT.
• The display looks similar to the following.
2.
Use the respective CHORUS
to specify how the CHORUS is applied.
3.
Use the REVERB ADJUST
to specify how the REVERB is applied.
4.
Use the MONO/POLY
select the sound output mode.
5.
MONO: Use the PORTAMENTO ON/OFF but-
tons set portamento to on or off. Use the TIME
∧ ∨
and buttons to set the portamento time.

Controller Edit

Specify how operation of the controllers, such as the wheels, etc., affects the sound.
•
These settings are effective when the instrument recieves controller data.
CONTROLLER
1.
On the SOUND EDIT menu display, select
CONTROLLER.
• The display looks similar to the following.
2.
Use the buttons to the left of the display to
select a controller.
• Two functions can be assigned to each controller.
∧
3.
Use the FUNCTION
a function for the controller.
∧
4.
Use the DEPTH and
depth of the function applied by the controller.
118
QQTG0665
∧ ∨
and buttons
∧ ∨
and buttons
∧ ∨
and buttons to
∨
and buttons to select
∨
buttons to set the
DIGITAL EFFECT
1.
Use the PAGE buttons to view the 2/2 display.
• The display looks similar to the following.
• The display for the effect type which is best-suited for the
sound currently being edited is selected.
∧
2.
Use the TYPE and
type of effect.
<ON/OFF button>
Specify whether the DIGITAL EFFECT button turns on or
off when the sound is selected. When set to ON, the DIG-
ITAL EFFECT button turns on automatically when the
sound is selected.
<STEREO/MONO button>
Select stereo (STEREO) or monaural (MONO) output of
the effect.
3.
Use the buttons along the bottom of the display
to select the attribute you wish to adjust.
• When the type is changed, the parameters revert to the
factory defaults.
5.
Use the TONE ENABLE ON/OFF
buttons to set the controller to on or off for
each tone.
• When set to INV, the effect is applied inversely.
6.
Repeat steps 2 to 5 for the other controllers,
as desired.
∧
7.
Use the GLIDE and
whether or not the glide effect is active.
ENABLE:
The glide effect is enabled.
DISABLE:
The glide effect is disabled.
Sound Edit
∨
buttons to select the
∧ ∨
and
∨
buttons to select