Part VII
Sound Load Option
The data for each individual sound is set with the most suitable effect settings, etc., but in some cases when switching from one
sound to another and these settings are recalled, the setup is not the way you want it. By using the SOUND LOAD OPTION, you
can adjust the settings so that specific data is not recalled.
1.
On the SOUND MENU display, select SOUND
LOAD OPTION.
• The display looks similar to the following.
Use the L and M buttons to select an item.
2.
∧
∨
Use the
and
button to set the filter to ON
or OFF.
APC Reverb Setting
Although an appropriate REVERB is applied for the automatic accompaniment parts depending on the rhythms by default, you
can adjust the REVERB level for each part.
1.
On the SOUND MENU display, select APC
REVERB SETTING.
• The display looks similar to the following.
2. Use the PART L and M buttons to select the
∧
part, the DEPTH
value (PRESET IN RHYTHM, 0 – 127).
• PRESET IN RHYTHM is an optimal preset value for each
rhythm for use with the APC Reverb Setting.
Theatre Sonic Part Setting (PR804)
The THEATRE SONIC effect can be set to on or off for each part.
1.
On
the
SOUND
THEATRE SONIC PART SETTING.
• The display looks similar to the following.
2. Use the PART L and M buttons to select the
∧
∨
part, the
and
(ON/OFF).
108
QQTG0665
∨
and
buttons to set the
MENU
display,
select
buttons to set the value
Sound