Velocity Change - Technics sx-PR604/M Operating Instructions Manual

Part IV

VELOCITY CHANGE

Modify the recorded velocity in specific measures of specific
tracks.
∧
1.
Use the TRACK and
track you wish to edit.
• You cannot select the track for the CONTROL, RHYTHM
or CHORD part.
• If ALL is selected, all tracks will be edited.
2.
Use the FIRST MEASURE
to specify the start point (measure number) of
the velocity change.
3.
Use the LAST MEASURE
specify the end point (measure number) of the
velocity change.
∧
4.
Use the VELOCITY
the change in velocity.
• The value you select will be added to or deleted from the
current velocity.
5.
Press the OK button.
• The confirmation display appears. Press the YES button
to execute the function, or press the NO button to cancel
the function.
NOTE CHANGE
Change of pitch of specified notes.
∧
1.
Use the TRACK and
track you wish to edit.
• You cannot select the track for the CONTROL, RHYTHM
or CHORD part.
• If ALL is selected, all tracks will be edited.
2.
Use the FIRST MEASURE
to specify the start point (measure number) of
the note change.
3.
Use the LAST MEASURE
specify the end point (measure number) of the
note change.
4.
Use the TARGET NOTE
specify the pitch of the note you wish to
change.
• The number next to the note name is its note number.
∨
buttons to select the
∧ ∨
and buttons
∧ ∨
and buttons to
∨
and buttons to specify
∨
buttons to select the
∧ ∨
and buttons
∧ ∨
and buttons to
∧ ∨
and buttons to
TRANSPOSE
Change of key of specific measures of specific tracks.
∧
1.
Use the TRACK and
track you wish to edit.
• You cannot select the track for the CONTROL, RHYTHM
or CHORD part.
• If ALL is selected, all tracks will be edited.
2.
Use the FIRST MEASURE
to specify the start point (measure number) of
the transpose.
3.
Use the LAST MEASURE
specify the end point (measure number) of the
transpose.
4.
Use the TRANSPOSE
specify the change in pitch.
• Increments are in semitones. A value of 12 is one octave.
A – value lowers the pitch, and a + value raises it.
5.
Press the OK button.
• The confirmation display appears. Press the YES button
to execute the function, or press the NO button to cancel
the function.
5.
Use the CHANGE TO
specify the pitch you wish to change to.
6.
Press the OK button.
• The confirmation display appears. Press the YES button
to execute the function, or press the NO button to cancel
the function.
Sequencer
∨
buttons to select the
∧ ∨
and buttons
∧ ∨
and buttons to
∧ ∨
and buttons to
∧ ∨
and buttons to
83
QQTG0665