Program Change Midi Out; Panel Memory Output - Technics sx-PR604/M Operating Instructions Manual

Part XII

Program Change MIDI Out

Use this function to immediately transmit specific PROGRAM CHANGE and BANK SELECT data from this display on a specified
MIDI channel.
1.
On the MIDI MENU display, select PROGRAM
CHANGE MIDI OUT.
• The display looks similar to the following.
Use the L and M buttons to select a function.
2.
MIDI CHANNEL:
The MIDI channel to transmit to (1 to 16).
PROGRAM CHANGE:
Specify the PROGRAM CHANGE number to transmit (1
to 128).
BANK SELECT MSB:
Specify the BANK SELECT MSB to transmit (0 to 127).
BANK SELECT LSB:
Specify the BANK SELECT LSB to transmit (OFF, 0 to
127).
• When set to OFF, neither the LSB nor the MSB are
transmitted.

Panel Memory Output

These are settings affect the transmission data when the PANEL MEMORY buttons are operated.
1.
On the MIDI MENU display, select PANEL
MEMORY OUTPUT.
• The display looks similar to the following.
∧
2.
Use the P.MEM and
PANEL MEMORY number.
∧
3.
Use the OFF/ON and
whether the data in the selected PANEL
MEMORY number is transmitted or not.
∧
4.
Use the PART and
part (RIGHT 1, RIGHT 2 or LEFT).
∧
5.
Use the P. CNG and
program change number (0 to 127, or OFF).
∧
6.
Use the BANK LSB
a BANK LSB (0 to 127).
∨
buttons to select a
∨
buttons to specify
∨
buttons to select a
∨
buttons to specify a
∨
and buttons to specify
∧ ∨
3.
Use the and buttons to change the setting.
4.
Press the SEND button.
• The specified data is transmitted.
• The data is unconditionally transmitted regardless of the
other settings.
∧
7.
Use the BANK MSB
a BANK MSB (0 to 127).
∧
8.
Use the VOL and
volume (0 to 127, or OFF).
9.
Repeat steps 4 to 7 for each part, as neces-
sary.
10.
Repeat steps 3 to 9 for each PANEL MEMORY
number, as necessary.
MIDI
∨
and buttons to specify
∨
buttons to specify the
133
QQTG0665