Revision
3.4
3.3
3.2
Date
Mar. 2019
Converted to online html format; some reorganization.
Dec. 2, 2018
Sept. 26, 2018
July 4, 2018
Mar. 1, 2018
Description
•
mstfwtrace
Utility: Added the following
options:
•
"--gvmi" and "--ignore_old_events"
•
Using mstconfig to Split a Port in a Remotely
Managed Switch
•
Added the following sections:
•
mstarchive - Binary Files Compression Tool
•
Using mstconfig to Split a Port in a Remotely
Managed Switch
•
mstcongestion - Tool for Setting Congestion
Mode and Action
•
mstprivhost
•
Updated section "Command Parameters" on page 80.
Added the following note to the "bb" option:
Note: The MFT 'bb' option is an advanced flag used
ONLY for production flows. It is NOT recommend to
use it as it can cause unrecoverable firmware burning
failures.
•
Updated the following sections:
•
Examples of mst Usage - FreeBSD
•
Supported Configurations and their
Parameters:
Added the following parameters:
BOOT_UNDI_NETWORK_WAIT, MKEY_BY_NAME,
ECPF_ESWITCH_MANAGER,
ECPF_PAGE_SUPPLIER,
FLEX_PARSER_PROFILE_ENABLE,
FLEX_IPV4_OVER_VXLAN_PORT,
SAFE_MODE_THRESHOLD and
SAFE_MODE_ENABLE
•
Updated mstfwreset Synopsis
•
Added table Impact of Secure Firmware on MFT to
section Secure Firmware Update
•
Added the following sections:
•
Re-Signing a Binary Image File
•
mstfwreset for SmartNICs
•
Added items to section mstfwreset Limitations
•
Added the following sections:
•
For 5th Generation Devices
•
Updated the following sections:
•
Querying the Device Configuration
•
mstconfig create_conf Command
•
Signing Binary Image Files
•
mget_temp Usage
•
mstlink Usage
•
Supported Configurations and their
Parameters: Added the following parameters:
SW_RECOVERY_ON_ERRORS
RESET_WITH_HOST_ON_ERRORS
IBM_TUNNELED_ATOMIC_EN
EXP_ROM_PXE_ENABLE
EXP_ROM_UEFI_x86_ENABLE
94