Nvidia MSTFLINT Documentation page 74

--rx_prbs <rx_prbs_mode>
--tx_prbs <tx_prbs_mode>
--rx_rate <rx_lane_rate>
--tx_rate <tx_lane_rate>
--invert_tx_polarity
--invert_rx_polarity
--lanes
-b |--ber_collect <csv_file>
--amber_collect <csv_file>
--ber_limit <limit_criteria>
--iteration <iteration>
--pc
--set_external_phy
--twisted_pair_force_mode
<twisted_pair_force_mode>
--cable
--dump
--ddm
--read
--length <length>
--page <pageNum>
RX PRBS Mode [PRBS31(Default)/PRBS7/...] (Optional -
Default PRBS31)
TX PRBS Mode [PRBS31(Default)/PRBS7/...] (Optional -
Default PRBS31)
RX Lane Rate [EDR(Default)/25G/10G/...] (Optional -
Default 25G)
TX Lane Rate [EDR(Default)/25G/10G/...] (Optional -
Default 25G)
PRBS TX polarity inversion (Optional - Default No
Inversion)
PRBS RX polarity inversion (Optional - Default No
Inversion)
PRBS lanes to set (one or more lane separated by
comma)[0,1,2,...]
Optional: Default all lanes
Port Extended Information Collection [CSV File]
AmBER Port Extended Information Collection For 16nm
Products and Later [CSV File]
BER Limit Criteria [Nominal(Default)/Corner/Drift]
(Optional - Default Nominal)
Iteration Number of BER Collection
Clear Counters
Set External PHY
Note: The flag is supported in NVIDIA Spectrum switch
systems only.
Twisted Pair Force Mode [MA(Master)/SL(Slave)]
Perform operations on the cables
Dump cable pages in raw format
Get cable Digital Diagnostic Monitoring information
Perform read operation from specific page
Length of data to read in bytes (Optional - Default 1
byte)
Specific page number to read/write
74