Table of Contents
Advertisement
mstarchive tool
The mstarchive tool allows the user to create a file with the mfa2
extension. The new file contains several binary files of a given firmware for
different adapter cards.
For further information, refer to section mstarchive.
mstprivhost
The ability to restrict the hosts from configuring the NIC. Meaning, only the
Arm side will have the privilege to configure the NIC.
Note: This utility is supported in BlueField devices only.
mstconfig in
Enables the user to manage (grant/restrict) mstconfig configuration
BlueField
privileges for BlueField Arm systems.
Bug Fixes
See
Rev. 4.10.0
ESXi
Added support for ESXi 6.7.
FreeBSD
Added support for verbose output when running "mst status" in FreeBSD.
mstfwreset
Enabled mstfwreset loading/unloading of the driver per a specific device in
Linux OSes.
Note: On Multi Host devices with firmware version lower than 1x.23.xxxx,
the flag "--pci_link_downtime 2.5" must be added to mstfwreset
Secure Firmware
mstflint now handles all the burn parameters when MCC is enabled and
displays the secure-FW CS tokens.
Supported Devices [Beta] Added support for BlueField SmartNIC.
mstconfig
Added the option to query partial parameters
mstconfig
Added the following new parameters:
Bug Fixes
See
Rev. 4.9.1
mstfwreset
Added support for mstfwreset in Power9 platforms.
Rev. 4.9.0
mstfwreset
Added support for a hot swap (or hot plug) of the PCIe slot.
.MFT Bug Fixes History v4.18.1
•
FLEX_PARSER_PROFILE_ENABLE
•
ECPF_ESWITCH_MANAGER
•
ECPF_PAGE_SUPPLIER
•
SAFE_MODE_ENABLE
•
SAFE_MODE_THERSHOLD
•
BOOT_UNDI_NETWORK_WAIT
.MFT Bug Fixes History v4.18.1
All
All
All
All
ESXi
FreeBSD
Linux
All
All
All
All
Linux
Linux
Linux
101
Advertisement
Table of Contents
