Table of Contents
Advertisement
Internal Ref.
No.
2060223
Description: Performing a driver restart while burning the firmware results in firmware
burning failure, and occasionally in device being inaccessible.
Keywords: Firmware burning, driver restart
Discovered in Version: 4.15.0
Fixed in Release: 4.17.0
1918749
Description: mstlink tool displays a wrong speed when using ETH cables on ConnectX-6
adapter cards.
Keywords: mstlink
Discovered in Version: 4.13.0
Fixed in Release: 4.16.0
1755062
Description: To execute firmware reset on a multi-host card, mstfwreset must be run
simultaneously on each one of the hosts. Running mstfwreset simultaneously on the same
host is incorrect and may result in server hanging.
Keywords: mstfwreset
Discovered in Version: 4.12.0
Fixed in Release: 4.16.0
1747607
Description: When using the mstfwreset tool to reset the firmware on the BlueField card,
the firmware is not synchronized between the host (SmartNIC device) and the Arm side.
Keywords: mstfwreset, BlueField
Discovered in Version: 4.11.0
Fixed in Release: 4.16.0
2125012
Description: In case a device enters the livefish mode and all the information on the flash
including write-protected manufacturing information is lost, mstflint might not be able to
recover the device.
Keywords: mstflint
Discovered in Version: 4.14.0-1
Fixed in Release: 4.16.0
2110890
Description: If there is a json-c library installed on the machine, some of mstflint tools like
mstflint and mstfwmanager will not be compiled successfully unless the installed library is
removed.
Keywords: mstlink
Discovered in Version: 4.14.0-1
Fixed in Release: 4.16.0
Issue
116
Advertisement
Table of Contents
