Mstflint Bug Fixes History - Nvidia MSTFLINT Documentation

mstburn Added the -fw_dir option which looks for a suitable firmware file in the
given directory
Support for generating a non-fail-safe image for ConnectX/ConnectX-2,
InfiniScale IV, and BridgeX devices
Debug tools Updated the msti2c utility
Added the mget_temp utility which reads the temperature of the
ConnectX/ConnectX-2, InfiniScale IV, and BridgeX devices

mstflint Bug Fixes History

The table below lists the history of bugs fixed.
Internal Ref.
No.
2578580 Description: Fixed an issue that resulted in getting MVPD read errors from the
mstfwmanager during fast reboot.
Keywords: mstfwmanager, MVPD_READ4 failed, fast reboot
Discovered in Version: 4.16.0
Fixed in Release: 4.17.0
2628490 Description: Fixed inconsistent flashing of the firmware when using the IPMB service.
Keywords: mstflint
Discovered in Version: 4.16.0
Fixed in Release: 4.17.0
2395589 Description: Changed the mstflint
of 1 second to avoid disconnections if the connected port is being activated.
To use the "legacy" activation flow, use the
Keywords: "--activate" flag, mstflint
Discovered in Version: 4.16.0
Fixed in Release: 4.17.0
2494596 Description: mstflint now supports the
activation on the newly burned firmware after the specified delay.
Note: The burn flow will be locked after this command has been sent for a couple of
minutes, until activation flow is done.
Keywords: "--activate_delay_sec" flag, mstflint
Discovered in Version: 4.16.0
Issue
flag behavior to include a minimal delay
"--activate"
"--activate_delay_sec 0"
"--activate_delay_sec"
Linux
Linux
Linux
Linux
command.
flag which performs the
114