Table of Contents
Advertisement
4.6 Extraordinary maintenance
Live parts
Danger of electrocution
• Ensure the appliance is switched off
before replacing the lamp to avoid the
possibility of electric shock.
Replacing the internal light bulb
Remove the bulb protector A by turning it
anticlockwise and replace bulb B with a
similar one. Re-fit bulb protector A.
24
Cleaning and maintenance
Removing the seal
To permit thorough cleaning of the oven, the
door seal can be removed. There are
hooks on all four sides to attach it to the
edge of the oven. Pull the edges of the seal
outwards to detach the hooks.
To keep the seals clean, use a non-abrasive
sponge and lukewarm water. Seals should
be soft and elastic.
Advertisement
Table of Contents
