Table of Contents
Advertisement
[Initial Setup] menu (Other menu items)
Menu item
[Chart Master Device]
[System ID]
[IP Address]
[Synchronization Log]
[Quick Self Test]
[Certification Mark]
[Service]
[Update Network
Equipments]
[Event Input Configu-
ration]
[Remote Controller
Configuration]
[Sirius Radio Diag-
nostic]
[Sirius Weather Diag-
nostic]
[Reset Default Set-
tings]
[Initial Setup] menu - [GRAPHIC INSTRUMENTS SETUP]
Menu Item
[Maximum Boat Speed]
[Maximum Wind Speed]
Menu Item
[Minimum Depth]
[Maximum Depth]
[GRAPHIC INSTRUMENTS SETUP] - [SEA SURFACE TEMPERATURE]
Menu Item
[Minimum Sea Surface
Temperature]
[Maximum Sea Surface
Temperature]
Description
Set to [ON] to use this unit as the master, [OFF] to use this unit as a slave.
The system ID for this device within the network.
IP address for this unit within the network.
Shows synchronization with devices connected to the network.
Displays various details regarding the TZT9F, radar and fish finder.
Displays relevant certification for this equipment.
Requires login password. For the service technician.
For the service technician.
Set the function for the event switch.
When there are multiple units in the NavNet network, the Remote Controller
MCU-004/MCU-005 can select the display to show on the unit with MCU-
004/MCU-005 connection. Further, the cycling order of displays can be set.
See the Operator's Manual.
Check the satellite radio of the FURUNO BBWX SiriusXM weather receiver
for proper operation. See the Operator's Manual.
Check the weather section of the FURUNO BBWX SiriusXM weather re-
ceiver for proper operation. See the Operator's Manual.
Reset the system to default settings.
Description
Set the transducer's maximum detectable
speed.
Set the transducer's maximum detectable
speed.
[GRAPHIC INSTRUMENTS SETUP] - [DEPTH]
Description
Set the transducer's minimum detectable
depth.
Set the transducer's maximum detectable
depth.
Description
Set the transducer's minimum detectable
temperature.
Set the transducer's maximum detectable
temperature.
3. HOW TO SET UP THE EQUIPMENT
Option (setting range)
[OFF], [Event Mark], [MOB],
[Ferry]
[OK], [Cancel]
Options (setting range)
1 (kn) to 99 (kn)
1 (kn) to 99 (kn)
Options (setting range)
1 (m) to 1999 (m)
1 (m) to 2000 (m)
Options (setting range)
0.00°C to 98.99°C
0.01°C to 99.99°C
3-11
Advertisement
Table of Contents
