Furuno TZT9F Installation Manual page 19

Multi function display
Hide thumbs Also See for TZT9F:
Table of Contents

Advertisement

Decide the most suitable site from the locations selected with the following proce-
dures.
1. Connect the power cable and transducer cable to the display unit.
2. Put the transducer into a water-filled plastic bag.
Press the transducer against the chosen site.
3. Tap
(power switch) to turn the power on.
4. After the startup procedure completes (approx. 90
seconds), the last used display appears. Tap the
[Home] icon (
screen and display mode settings. See section 3.3
for how to use the menu.
5. Scroll the menu to show [Fish Finder] in the menu, then tap [Fish Finder].
6. Scroll the [Fish Finder] menu to show the [FISH FINDER INITIAL SETUP] menu,
then tap [Fish Finder Source].
7. Confirm the available fish finder from the list of available sounders, then tap the
appropriate fish finder. For the purpose of this example, the default setting
[TZT9F] (internal sounder) is selected as the source.
8. Tap the [<] icon to return to the [Fish Finder] menu.
9. Scroll the [Fish Finder] menu to show the [FISH FINDER INITIAL SETUP] menu,
then tap [Transducer Setup].
10. Tap [Transducer Setup Type].
11. Tap [Model].
12. Tap the [<] icon to return to [Transducer Setup] menu.
13. Tap [Model Number], scroll the menu to show your transducer model, then tap the
transducer model number.
14. Tap the [<] icon twice to return to the [Fish Finder] menu, then scroll the [Fish Find-
er] to show the [FISH FINDER INITIAL SETUP] menu.
15. At the [Transmission Power] menu item, set the transmission power to a level of
[Max].
16. Scroll the menu to show [Fish Finder Transmit], then tap [Fish Finder Transmit].
Check if the bottom echo appears on the right side of the screen, in the display
area.
If no bottom echo appears, repeat the procedure until a suitable location is found.
17. Turn off the power of control unit and remove the transducer from the plastic bag
and wipe the face of transducer with a cloth to remove water and any foreign ma-
terial.
) to show the home
Home
1. MOUNTING
Plastic bag
Water
Hull plate
1-11

Advertisement

Table of Contents
loading

Table of Contents