Touchscreen Setup - Pentair INTELLIWATER PNR-POE1-XTR3-01 Installation And Operation Manual

TOUCHSCREEN SETUP

The XTR3 control was designed to be easy to set up and begin using right out of the box. The following simple procedure can be
used to set up the system and begin treating water in most typical applications.
Notice
Steps 2 and 3 are optional and are not required to start the system. All control settings may be changed after the unit is
in service.
Notice
Press on any Quick Start screen to reset the screen back to its default settings.
1. After plugging in the unit, the Format screen (Figure 9) is displayed.
Press the language button to adjust the system's displayed language (international version only): English, French, German, Italian,
Spanish, or Dutch. Press
Press the units button to adjust the system's units of measure (either U.S. or metric). Press
Press the hardness units button to adjust the system's hardness units of measure (grains per gallon, mg/L or ppm, German degrees,
French degrees, or English degrees). Press
Figure 9
Notice
If the screen is blank after plugging in the unit, touch the screen to turn the screen on.
14 • PENTAIR INTELLIWATER CONNECTED WATER SOFTENER
when finished.
when finished. Hardness units are adjustable only if metric units are selected.
when finished.