Mechanical Adjustments - Datamax Prodigy Plus Operator's Manual

LCD Display
CUTTER FAULT
RIB SAVER FAULT
CUTTER NotEQP
RIBSVR NotEQP
5.3

Mechanical Adjustments

The following mechanical adjustments should be performed only when
required, additional sections that follow provide detailed descriptions for
each adjustment.
Media Width adjustment, (see Section 5.3.1).
Media sensor adjustment, (see Section 5.3.2).
Printhead Replacement, (see Section 5.3.3).
Prodigy Max Operator's Manual
Alarm Description
The cutter operation failed
Possible causes:
Cutter not installed
Jam in cutter
Defective cutter hardware, call for service.
Warning:
Turn OFF the Printer and remove the AC power
cord before attempting to remove any jam or
obstruction from the cutter.
The Ribbon Saver operation failed
Possible causes:
Obstruction in ribbon area
Ribbon Saver Option is not installed
Defective ribbon saver hardware, call for
service.
The Cutter Option is enabled and the cutter is not
present
The Ribbon Saver Option is enabled and the
ribbon saver is not present
59