Trace & Auto Run; Config Page; Network - Samsung SNP-3350 User Manual

Chapter 4. Using Web Viewer
4.2.2.4. Trace & Auto Run
■PTZ Trace Setup
Category
Trace No. Up to 4 traces can be saved.
Replay Replays a route saved by the Trace function.
Pressing the Memorize button starts saving the route of the Pant/Tilt or Zoom/
Memorize
Focus operation automatically.
During Replay mode, press the Stop button to abort the Trace operation.
Stop
During Memorize mode, press the Stop button to finish memorizing a route.
■Auto Run Setup
Category
Mode 8 modes are available: OFF, HOME, Preset, Swing, Group, Tour, Trace, and A.Pan.
Select time to activate Auto Run. (1 to 60 seconds and 1 to 60 minutes are
Time
available.)
In the HOME and Preset modes, Number is used to set up preset numbers.
In the Swing mode, Number is used to set up the Pan, Swing, and P&T modes.
Number In the Group and Trace modes, Number is used to set up groups and trace
numbers.
In the A.Pan mode, Number is used to adjust the Pan speed.
Available only in the A.Pan mode; enables a tilt angle to be set up for the Pan
Tilt Angle
operation.
Speed Available only in the A.Pan mode; enables to set the Pan operation speed.
Caution
• P ressing the Set, Clear, or Stop button aborts sequence action, for example, PTZ operations of the
camera like Preset, Group, Tour, etc.
66
NETWORK PTZ CAMERA User Guide
Description
Description

4.2.3. Config Page

The following page appears when selecting
the left side of the screen move to the relevant menu page.

4.2.3.1. Network

■Interface
LAN, xDSL, and DHCP options are available depending on your network environment.
Category
LAN If the camera uses a static IP, enter the network information of the camera.
xDSL Enter the ID and password of your xDSL server.
DHCP Select this option when the camera receives an IP from a DHCP server.
NETWORK PTZ CAMERA
at the top of the screen. Buttons on
Description
67
User Guide