Network Configuration & Connection Via Website - Samsung SNP-3350 User Manual

Chapter 3. Installing Camera & Network Setup
To attach or detach the camera, refer to the picture.
※
* Attaching the Camera: Hold up the camera and push it to the mount as shown in the picture.
Push the camera until you hear a "click".
* Detaching the Camera: To detach the camera, pull the camera downward while pushing up the
unlock buttons on the camera.
Unlock Button
To Detach the
To Attach the
Camera
Camera
3.7. Network Configuration & Connection via Website
Use these instructions if you are using a single SNP-3750/3350 37x/33x PTZ network
camera.
1. Connect the SNP-3750/3350 37x/33x PTZ network camera to a computer with a cross
cable.
30
NETWORK PTZ CAMERA
Unlock
User Guide
Notes
For the network settings, you must register the internal IP of your computer.
To register the IP, go to My Network Environment → Properties → Local
Area Connection → Properties.
Next, select Internet Protocol (TCP/IP) and click the "Properties" button
below, then press "Advanced..." to set advanced options for your product.
•192.168.1.XXX as the internal IP of your computer. (XXX: 0 ~ 255)
Caution
• 1 92.168.1.100 is the IP address for the camera and will be unavailable as the internal IP address
for your computer.
31
NETWORK PTZ CAMERA User Guide