E-Mail-Ftp (Alarm) - Samsung SNP-3350 User Manual

Chapter 4. Using Web Viewer

4.2.3.4. E-mail-FTP (Alarm)

Enter the information for your FTP server and e-mail address to transfer data to when the
alarm activates.
■E-mail/FTP Setup
Enter the information for your FTP server and e-mail address to transfer data to when the
alarm activates.
Category
Server Name Enter the domain name or IP address of your FTP server.
Server Port Enter the port number of your FTP server.
Enter a home directory in the FTP server to save data. Make sure to
FTP Home Directory
enter "/" to save the data directly to the FTP server's home directory.
User ID Enter an ID to log in to the FTP server.
User Password Enter the password for the ID that is entered above.
78
NETWORK PTZ CAMERA User Guide
Description
Recipient E-mail
Address 1 Enter a maximum of 2 e-mail addresses to transfer data to when the
Recipient E-mail alarm activates.
Address 2
If you use an e-mail server, enter the name of the e-mail SMTP
SMTP Server Name
server.
E-mail
Use Check to use an e-mail server; it requires an ID and password.
Authentication ID Enter an ID to connect to your e-mail server.
Password Enter the password for the ID that is entered above.
Mail Subject Enter the subject for an e-mail.
Mail Body Enter contents for the e-mail.
Notes
Upon the occurrence of an event, a JPEG image is sent via e-mail or
uploaded to the FTP server.
Caution
• New settings are saved only if you click the
The button cancels new settings.
• T hese settings do not apply to the Continuous Jpeg Image Transmission to FTP Server option at
the Video Setup → Streaming menu.
NETWORK PTZ CAMERA
button at the bottom of the screen.
79
User Guide