G.hn Settings - ZyXEL Communications PLA6457 User Manual

3.3 G .hn Se tting s
Your PLA conforms to the G.hn (G.hn) standard for sending data over electrical power wiring in your
home. Use the
G.hn Screen
Fig ure 9
The following table describes the labels in this screen.
Table 6 G.hn Screen
L ABEL
Basic Settings
MAC address
Device ID
Chapter 3 Web Configurator
screen to change the basic settings of the PLA. Click
G .hn
DESC RIPT IO N
This field displays the MAC address of your PLA. The MAC address of your PLA can be found by
looking at the label on your device. It consists of six pairs of hexadecimal characters
(hexadecimal characters are "0 – 9" and "a – f"). In the case of the PLA, this label is on the back
of the device.
Every PLA acts as the
DO MAIN_MAST ER
default is
De vic e ID 1.
After you press the
ENC RYPT
determine which one acts as the
. It displays
DO MAIN_MAST ER
this table for more information).
Note: When none of the PLA works as the
manually configure your PLA as the
Fo rc e no de T ype
PLA6457 User's Guide
by default before connecting to another PLA. The
button to connect your PLA to another PLA, the two PLAs will
This field displays
DO MAIN_MAST ER.
when your PLA is the
2 END_PO INT
DO MAIN_MAST ER
END_PO INT
field. The will be set to
De vic e ID
19
to access this screen.
G .hn
when your PLA is the
1
(see the
Fo rc e no de T ype
in the network, you can
by selecting in the
END_PO INT
.
0
field in