Setting Up A New Network With A New Pla - ZyXEL Communications PLA6457 User Manual

4.5 Se tting Up a Ne w Ne two rk with a Ne w PL A
This section shows you how to use your new PLAs to set up a new G.hn network separate to your existing
network.
The figure below shows two G.hn networks in a house. The first network (
connected to a printer and access to the Internet. The second network (
with a media adapter such as the Zyxel DMA-1100P you can use your TV to watch movies and play
games which are stored on a computer.
Add New Adapters to Make a Second Network
Fig ure 20
1
Connect your new PLA and open the Web Configurator as shown in
shown below appears.
2
Type a
Do m a in Na m e
use the same new
Chapter 4 G.hn Network Setup Tutorial
that is different from the
for all new adapters you want to add to your new network.
Do m a in Na m e
PLA6457 User's Guide
for your existing network. Make sure you
Do m a in Na m e
32
) shows the home computer
1
) has no Internet access but
2
Section 4.5 on page 32. The screen