Table of Contents
Advertisement
Two Separate G.hn Networks
Fig ure 6
G
If the Powerline (
connection process, making certain you press the
within 2 minutes of each other. If that does not work see Section 5.4 on page 36 for suggestions.
See Troubleshooting in
the lights.
2.4 RESET Butto n
The
button allows you to reset the PLA to the factory defaults. It also unpairs the PLA from a
RESET
network.
The following table summarizes the actions that occur when the
lengths of time.
Table 5
RESET
T IME
10 to 15
seconds
Note: The domain name is unknown when you use the
PLA to a different network.
See Troubleshooting in
the lights.
Chapter 2 RESET and ENCRYPT Buttons
E
H
) lights on both
s do not light up, the
PLA
Chapter 5 on page 36
AC T IO N
Clear all user-entered
configuration information and
return the device to its factory
defaults.
Chapter 5 on page 36
PLA6457 User's Guide
F
s are not connected. Repeat the
PLA
buttons for the correct time and
ENC RYPT
for suggestions on problems with the
PO WER L IG HT BEHAVIO R
The power (
) light blinks and
then shines steadily.
RESET
for suggestions on problems with the
15
ENC RYPT
button is pressed for specific
RESET
PO WERL INE L IG HT BEHAVIO R
The Powerline (
off when it disconnects from the
G.hn Network.
button. You can then pair the
ENC RYPT
button and
) light turns
button and
Advertisement
Table of Contents
