The Power lights on both devices blink, then the Powerline light blinks red.
Do not worry, the connection process is proceeding normally.
The Power lights on both devices finished blinking, but only one device's Powerline light is on.
One device may have connected to a third PLA. To check if device A is connected to device B and not
to device C, disconnect device B from its power source. Device A's Powerline
the connection is with device B and stay on if it is with device C. Disconnect device A from device C by
pressing the
RESET
pressing the
ENC RYPT
Chapter 5 Troubleshooting
button on device C for 10 – 15 seconds. And then reconnect device A to device B by
button for 2 to 5 seconds on both devices within 120 seconds.
PLA6457 User's Guide
37
(
)
light will turn off if