Panasonic PT-56DLX25 Service Manual page 41

REMOVAL OF THE COLOR WHEEL UNIT
CAUTION:
1. Do not touch either side of the Color Wheel (Filter) surface or the Color Wheel Hub.
Use extreme caution when handling the Color Wheel to avoid damage, dust, spots (especially fingerprints), etc.
Clean the Color Wheel if necessary. Refer to "CLEANING METHOD" in SERVICE NOTES.
2. Be extremely careful not to damage the Color Wheel F.P.C.
1. 1) Disconnect Connectors PL2, PL3 and release from the hook.
2) Peel the Sheet from the Color Wheel F.P.C.
3) To access Screw (463), lift the Dustproof Sheet Unit, and remove the Optical Chassis CW Cover by removing the 2 Screws
(463) and then release from the hook of the Optical Chassis CW Cover.
4) Remove the CW Sponge and carefully pull off the Color Wheel Unit.
Sheet
463
Color Wheel Unit
PCW1
Connector
Cable
PCW1
Clamper
CW Sponge
Bosses
463
Optical Chassis
CW Cover
Hook
Color Wheel
F.P.C.
Hook
Boss
PL3
PL2
Fig. P2-1
39
Do not touch the
surface and hub.
The 2 Screws (463) are for removing the Color Wheel Unit
(Do not turn the screws.)
PT-56DLX75 / PT-61DLX75
463
Color Sheet
Wheel
F.P.C.
463