Panasonic PT-56DLX25 Service Manual page 31

5. 1) Remove the Front Shield Metal by removing the 5 Screws (402).
2) Remove the 2 Screws (402), and pull off the Main C.B.A. with the Main/Tuner Board Mount Metal. (BtoB Connector PDG1
is disconnected.)
3) Remove the Main C.B.A. by removing the 6 Screws (479).
Clampers
Front Shield
Metal
402
Clampers
402
402
Replacement Notes for Main C.B.A. (Circuit Board DG):
These parts will be necessary when replacing. Set aside, keep, and re-use.
- 20-pin Cable (PDG4 Connector Cable) (Ref. No. 14)
- PDG5 Connector Cable
480
Main/Tuner Board
Mount Metal
402
402
402
Fig. D4-4
20-pin Cable
14
479
479
PDG1
Main C.B.A.
(Circuit Board DG)
402
29
PT-56DLX75 / PT-61DLX75
PDG5
Connector Cable
479
479
479
479