Panasonic PT-56DLX25 Service Manual page 28

PT-56DLX75 / PT-61DLX75
REMOVAL OF THE BALLAST C.B.A.
1. Remove the Rear Cover and the Rear Shield Plate. Refer to Step 1~2 in "REMOVAL OF THE OPTICAL BLOCK UNIT FROM
THE CABINET."
2. Remove the Lamp by loosening the Screw from the front of the cabinet.
3. 1) Disconnect Connectors B1, B2 then releasing the clampers.
2) Remove the 2 Screws (421), disconnect the Lamp Connector and release from the hook.
3) Remove the Ballast C.B.A. after releasing the 4 latch tabs.
latch tabs
Hook
Lamp
Connector
Fig. D4
26
Ballast C.B.A.
B1
B2
421 421