Panasonic PT-56DLX25 Service Manual page 24

PT-56DLX75 / PT-61DLX75
REMOVAL OF THE TV UNIT FROM THE CABINET
1. Remove the Rear Cover and the Rear Shield Plate. Refer to Step 1~3 in "REMOVAL OF THE OPTICAL BLOCK UNIT FROM
THE CABINET."
2. 1) Remove the 2 Screws (401).
2) Slide the TV Unit with the Digital Tuner C.B.A. slightly then disconnect Connectors PA1, PDG3 and the 2 Speaker Connectors.
3) Remove the TV Unit with the Digital Tuner C.B.A.
The 2 Screws (401) are for removing the TV Unit with the Digital Tuner C.B.A.
2 Speaker
Connectors
Fan 2 Connector
Thermostat/Cover Switch Connector
PDG3
Speaker
Connectors
401
401
Clampers
Screw for GND
PL4
(From Base
C.B.A.)
PA1
(From Fan 3)
PA1
401
PDG3
(From Operation
C.B.A.)
Screw for
GND
Clamper
PL1 (20-pin Cable)
(From Main C.B.A.)
PL5
(From Main
C.B.A.)
Clamper
Clamper
Clamper
Fig. D2-1
22
TV Unit with
Digital Tuner C.B.A.
Slide
B2 B1
(From Base (From Power
C.B.A.) C.B.A.)